Yazmat
Community Contributor
Pally Lv351 | Alchy Lv318
|
Post by Yazmat on Dec 30, 2017 20:29:48 GMT
For resist set catura is the best you can get anyway For weapon you should use genius or if you want to use rod/throw for the extra delay and damage the closest thing is throat knife I have Genius but sometime I like to use Rod. I hate how I attack really slow with Genius but that's just how it is with swords. o3o What is proper stats of throat knife? I checked JP site but I also check ENG site, it was a bit different for the one on ENG site? o.O
On senki > MATK + 20% Chance Defense + 15% Hate Increase - 10% Auto Skill Activate + 10% Magic Avoidance + 5% Defense, Magic Counterattack with Probability
(Hidden performance: MP recovery with probability of defense, damage mitigation during defense)
On Iruna-Info > MATK +20% Cast defense +15% Hate Rise -10% Autoskill +10% Magic Evasion +5% Autoskill If [Mage] then Melee R +10% Magic R +10% Fire Magic +10% Neutral Magic +10%
Notes: hidden performance: MP recovery in the defense during the probability , defense when damage reductionAs far as I have seen, the stats on iruna-info are correct, I use throat knife iniliba as a replacement for genius morbelzeem when boss don't hit so hard for faster kill
|
|
|
Post by super n00b on Dec 30, 2017 20:32:22 GMT
I have Genius but sometime I like to use Rod. I hate how I attack really slow with Genius but that's just how it is with swords. o3o What is proper stats of throat knife? I checked JP site but I also check ENG site, it was a bit different for the one on ENG site? o.O
On senki > MATK + 20% Chance Defense + 15% Hate Increase - 10% Auto Skill Activate + 10% Magic Avoidance + 5% Defense, Magic Counterattack with Probability
(Hidden performance: MP recovery with probability of defense, damage mitigation during defense)
On Iruna-Info > MATK +20% Cast defense +15% Hate Rise -10% Autoskill +10% Magic Evasion +5% Autoskill If [Mage] then Melee R +10% Magic R +10% Fire Magic +10% Neutral Magic +10%
Notes: hidden performance: MP recovery in the defense during the probability , defense when damage reduction As far as I have seen, the stats on iruna-info are correct, I use throat knife iniliba as a replacement for genius morbelzeem when boss don't hit so hard for faster kill Ok, thanks.
|
|
|
Post by Krish (Retired Player) on Nov 18, 2018 21:28:45 GMT
Updated some of the skills and equipment. Coming soon: Relic Crysta Recommendations The MATK Set for Grief Chain Adding more Equipment options to Sets and highlighting what I use/would use
|
|
|
Post by Krish (Retired Player) on Apr 4, 2019 13:26:02 GMT
Updated the equipment sets with relic crystas you may want to use on your alchemist as well as some equips.
|
|
♪Sumire
Member
Summoner new skills pls *-*
|
Post by ♪Sumire on May 11, 2019 0:18:51 GMT
just some bits and bytes from me
for grief chain set i use spellbook v4 wizard and throat sauro2 together with my resist arm/add/spec
spellbook wins even though it gives lower matk but higher neutral magic throat around 980k with full ailments+spellboost = matk 6k spellbook deals 1m with full ailments +spellboost = matk 5k
as for the evasion thingy im an eva alchemist but doesnt use alot of agi
80 agi but full green line resist type except i changed malti to shelk +100 gr with quick turn i gets around 980 eva without other boosters aside from the ones stated above every blindable boss is easily dodged n.n its pretty handy too since i can use full drop set on most bosses (cheap 2s gears with currones) compare to full resist which becomes kinda soft if u change a gear (although i rarely use full currone instead i use either burn or poison gears)
thinking of restatting to at least 250 agi since i read somewhere on forums that having just high eva isnt enough but need a certain amount of agi for the 95% evasion chance
|
|
|
Post by Loftyz47 on Jul 7, 2019 18:55:08 GMT
combine miasma with counter set for big success ! my set is
Lv386, Prod 220, 448 INT+DEX+VIT 100 Red Line, Blue Line
Genius271 ◇Miasma ◇Miasma ☆Fluency1 Dragon Mail(up3)42 ◇Miasma ☆Auto5 Ensis Shield(up)38 ◇Miasma ◇Miasma ☆Auto4 --- ☆Auto3 Myrica Wristlet ◇Miasma ◇Miasma ☆Auto2 ▲Cordal ▲Sauro II ▲Sauro III ▲Vatendeth ▲Halios (6 purple line) □Nejua, 3x □Burn Damage +1%, 8x □Poison Damage +1%, (7 Green, 3 Blue)
625483 Burn 318361 Poison 191467 Bleed 200000 Rain (against a trash mob, 141k against Angenger)
Definitely needs more autoskill+% than what's listed above, cause I still very rarely die against Angenger, who has a ratecut-like attack at half HP. Cordal II, Jahoel AI, & Obligaus AI would be insane upgrades. So would either Epaulette with the counter & Skill Delay -1sec. Myrica is bad for rate cut bosses (obviously), & Gaiety Ring is probably the best spec, but some resist/HP is still helpful for surviving multiple hits. I think at least 70k HP is needed for ep6 boss fights. It really depends what boss you're farming.
The more autoskill+%, the better; but when you have enough to be theoretically unkillable, you don't need any more. In any case, Frederico on weapon, Douin on spec, or Wizard on anything can fix some of the flaws.
MATK is 2500. Not really important. CSPD 606, nothing you can do about that, lol. Stuck in cast-time a lot, so it's not good against bosses with field mechanics that need to be avoided (Joshuca, s450, ..?). On the upside, cast defense+% is great, like the 10% that comes with Jahoel AI..
Under the assumption that all 3 counters have 10% base proc rate, and 6 purple + 100 in both colours gives Autoskill+4% total; my set (Autoskill+36%) lets you counter 87.1% of attacks With Gaiety, 94.3% With that + Cordal→Cordal II & Sauro II→Jahoel, 96.6%
|
|
|
Post by Krish (Retired Player) on Jul 18, 2019 20:47:46 GMT
just some bits and bytes from me for grief chain set i use spellbook v4 wizard and throat sauro2 together with my resist arm/add/spec spellbook wins even though it gives lower matk but higher neutral magic throat around 980k with full ailments+spellboost = matk 6k spellbook deals 1m with full ailments +spellboost = matk 5k as for the evasion thingy im an eva alchemist but doesnt use alot of agi 80 agi but full green line resist type except i changed malti to shelk +100 gr with quick turn i gets around 980 eva without other boosters aside from the ones stated above every blindable boss is easily dodged n.n its pretty handy too since i can use full drop set on most bosses (cheap 2s gears with currones) compare to full resist which becomes kinda soft if u change a gear (although i rarely use full currone instead i use either burn or poison gears) thinking of restatting to at least 250 agi since i read somewhere on forums that having just high eva isnt enough but need a certain amount of agi for the 95% evasion chance Interesting. Maybe you could consider using Absolute/Magic Evasion in that build since you dont have a lot of AGI? It might come at the sacrifice of your resistance but up to you, I'm not so sure if its worth trying. Well now we know that Grief chain is controlled by Neutral Magic. I will add a grief chain set with neutral magic and matk in consideration. Loftyz47 That build really shines on boss fights, even more so with that mega bleed upgrade with Miasma, if you didn't use smog on the enemy you could probably get some high damage on that with the counter set.
|
|
|
Post by Geødude on Sept 30, 2019 11:02:14 GMT
Finally decided to do prod, so I'm making an alchemist. Few questions u.u
1) Is it possible to finish all mq without doing prod? Mostly concerned about damage. I'll be using a resist set for mq. 2) I was planning to do all mq first, then do prod afterwards. I'm concerned about these skills: Craft Technique, Efficiency, Meister, Workshop. Which of them affects success rate? Cuz from what I read, it's beneficial to use fail sets to lvlup prod, and the skills might make it harder for me.
Thanks in advance!
|
|
|
Post by NightBreeze on Sept 30, 2019 11:41:33 GMT
Finally decided to do prod, so I'm making an alchemist. Few questions u.u 1) Is it possible to finish all mq without doing prod? Mostly concerned about damage. I'll be using a resist set for mq. 2) I was planning to do all mq first, then do prod afterwards. I'm concerned about these skills: Craft Technique, Efficiency, Meister, Workshop. Which of them affects success rate? Cuz from what I read, it's beneficial to use fail sets to lvlup prod, and the skills might make it harder for me. Thanks in advance! Congrats on beginning your prod journey! 1. Yes. It'll be a bit slower, but I think you'll definitely manage to solo in time. 2. Craft technique increases success rate, but this passive skill can be turned off when you need more fails. Efficiency and Meister don't affect success rate. Workshop increases success rate, but it's an active skill, so use it just when you want more success rate, such as when strengthening gear.
|
|
|
Post by Geødude on Sept 30, 2019 12:36:21 GMT
Finally decided to do prod, so I'm making an alchemist. Few questions u.u 1) Is it possible to finish all mq without doing prod? Mostly concerned about damage. I'll be using a resist set for mq. 2) I was planning to do all mq first, then do prod afterwards. I'm concerned about these skills: Craft Technique, Efficiency, Meister, Workshop. Which of them affects success rate? Cuz from what I read, it's beneficial to use fail sets to lvlup prod, and the skills might make it harder for me. Thanks in advance! Congrats on beginning your prod journey! 1. Yes. It'll be a bit slower, but I think you'll definitely manage to solo in time. 2. Craft technique increases success rate, but this passive skill can be turned off when you need more fails. Efficiency and Meister don't affect success rate. Workshop increases success rate, but it's an active skill, so use it just when you want more success rate, such as when strengthening gear. Thank you so much! It'll be a long journey and you set my mind at ease u.u
|
|
Pixie
Member
Profile pic wip by @Acetyl
|
Post by Pixie on Sept 30, 2019 15:55:47 GMT
Finally decided to do prod, so I'm making an alchemist. Few questions u.u 1) Is it possible to finish all mq without doing prod? Mostly concerned about damage. I rushed mq without any production with my alchemist before i even knew production affects damage lol. Its possible for sure :D
|
|
|
Post by Geødude on Sept 30, 2019 17:01:00 GMT
Finally decided to do prod, so I'm making an alchemist. Few questions u.u 1) Is it possible to finish all mq without doing prod? Mostly concerned about damage. I rushed mq without any production with my alchemist before i even knew production affects damage lol. Its possible for sure Awesome! Can I ask what eq set you used for mq? Cuz I'm honestly excited about starting prod, but there's no way that I can afford 3 Inilibas right away u.u
|
|
Pixie
Member
Profile pic wip by @Acetyl
|
Post by Pixie on Sept 30, 2019 17:07:23 GMT
I rushed mq without any production with my alchemist before i even knew production affects damage lol. Its possible for sure :D Awesome! Can I ask what eq set you used for mq? Cuz I'm honestly excited about starting prod, but there's no way that I can afford 3 Inilibas right away u.u I used iniliba boo genius 20% hp sieger iniliba forgot the spec its been awhile lol if u cant afford inilibas or even slots try with ns but at least get boo iniliba it helps so much xD sieger u can replace with wolf pup chapu or enis shield i used universe on bosses that didnt hit as hard
|
|
|
Post by Geødude on Sept 30, 2019 18:06:55 GMT
Awesome! Can I ask what eq set you used for mq? Cuz I'm honestly excited about starting prod, but there's no way that I can afford 3 Inilibas right away u.u I used iniliba boo genius 20% hp sieger iniliba forgot the spec its been awhile lol if u cant afford inilibas or even slots try with ns but at least get boo iniliba it helps so much xD sieger u can replace with wolf pup chapu or enis shield i used universe on bosses that didnt hit as hard Thank you I do have Genius s, BOO up Iniliba, and Catura. I was thinking of getting Wolf Pup, yes. I was going to try using Melee/Magic Resistance II xtals but I was worried it might not help much. Looks like it might just work
|
|
|
Post by Geødude on Oct 4, 2019 18:45:41 GMT
I was wondering why CRT isn't a recommended stat? I saw that CRT affects bleed damage in that formula thread. Does bleed have a dmg cap, maybe? Is it safe to go INT=VIT=DEX>CRT+100EXP?
|
|